The PR2 SDI-12 is a digital alternative to the analogue PR2 Profile Probe. SDI-12 compatibility allows integration into new and existing SDI-12 systems.
Multiple PR2 SDI-12s can connect to a compatible data logger via a single cable
Enables the creation of low cost highly flexible sensor networks
Compatible with existing PR2 access tubes and augering kits
Flexible integration with 3rd party SDI-12 hardware
Low power design; ideal for remote sites
The PR2 SDI-12 Profile Probe builds on the reputation and field proven technology of the analogue PR2. By adopting the widely used SDI-12 interface (v1.3) the PR2 SDI-12 can be integrated with an even wider range of data loggers, sensors and equipment.
SDI-12 is an established communication standard adopted by many manufacturers of environmental monitoring and control equipment. It is popular because it allows large numbers of sensors (from many vendors) to be connected to a logger via a simple cable network, thereby reducing the cost and complexity of wiring large sensor installations. The PR2 SDI-12 conforms to the industry standard SDI-12 (v1.3) specification.
Cables and connectors
The PR2 SDI-12 has a high quality, stainless steel IP67 rated connector (M12 x 5-way) – connecting to the standard Delta-T range of M12 x 5-way cables and accessories. The M12 x 5-way cables are also compatible with Delta-T’s ML3, SM150T and EQ3 sensors.
(NB: The M12 x 8-way range of cables used for analogue PR2 connection is not compatible with the SDI-12 version of the PR2. Analogue and SDI-12 sensors cannot be mixed on the same cable system.)
GP2 SDI-12 Data Logger – an ideal partner
The PR2 SDI-12 is fully compatible with the SDI-12 enabled GP2 Data Logger and Controller – which features simple point & click configuration.
Up to 50 SDI-12 Profile Probes can be connected to a single GP2 (subject to power requirements). In addition to SDI-12 input, the GP2 can log 12 analogue channels.
The SDI-12 enabled GP2 Data Logger and DeltaLINK enable quick and easy creation of sensor networks – without need to resort to the often complex programming methods typically employed by other manufacturers.
Due to the flexibility of the SD1-12 interface and the GP2 Logger, multiple power and cabling configurations may be possible when building a sensor network. Please refer to the SDI-12 Profile Probe User Manual for further information.
The SDI-12 Profile Probe’s electronics have been designed to improve power efficiency – reducing the overall power requirement. This is an important advantage for remote site applications.
HH2 Moisture Meter
The HH2 Moisture Meter can display readings from the PR2 SDI-12 Profile Probe*. This is a great advantage for customers who value the freedom to use SDI-12 Profile Probes in both installed and portable applications. Pre-February 2017 HH2s can be upgraded at low cost (via firmware) to enable PR2 SDI-12 readout.
The SDI-12 PR2 is connected to the HH2 Meter by the SDI-12/5W-HH2 cable.
