BENEFITS
Measure PM10 and PM2.5 simultaneously
Add up to 30 different gaseous pollutants (CO, CO2, NO2, VOC, O3, SO2, H2S and more)
Active fan sampling ensures highest possible accuracy
Monitor fits comfortably in the hand
Automatic humidity compensation
Can be field calibrated to a trusted reference source
Long life lithium battery allows a full 24 hours in the field
Download data direct to PC via USB
Free PC software (Windows 7, 8, XP and above compatible)
APPLICATIONS
Ambient (outdoor) air quality surveys
Checking pollution “hotspots”
Validating air quality models
Indoor air quality testing
Personal exposure monitoring
Short term fixed monitoring
Overview
PORTABLE PARTICULATE MONITOR PM10 / PM2.5
Aeroqual is excited to introduce a truly handheld portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments.
Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.
The monitor can also be used to measure gaseous pollutants such as carbon monoxide (CO), carbon dioxide (CO2), nitrogen dioxide (NO2), ozone (O3), sulfur dioxide (SO2), and hydrogen sulfide (H2S). Simply swap the PM sensor head for the gas sensor head of your choice.
HOW DOES IT WORK?
The PM sensor head uses a laser and optical sensor to measure light scattered from particles passing through the laser beam. The optical sensor transforms scattered light into electrical signals which are processed to provide mass measurements – in this case PM2.5 and PM10.
Active sampling and humidity compensation
Like all Aeroqual sensor heads the PM sensor head has an in-built fan to ensure a stable and precise flow of sample air to the sensor. The sensor head also compensates for humidity by way of an on-board humidity sensor. In humid conditions light scattering sensors are likely to read high because moisture surrounds particles, causing them to appear ‘bigger’. The humidity compensation feature reduces this effect on the measurement.
Display and K factor application
The PM sensor head is supplied factory-calibrated and ready to use. An electrical signal is passed from the sensor head to the Aeroqual Series 200/300/500 base unit which displays the measurements on the screen in milligrams per cubic metre (mg/m3). In the case of the Series 300 and 500 base units, a gain (or K factor) can be applied to the sensor output. This allows users to adjust the readings relative to a trusted source such as EPA-approved reference monitor.
Battery and datalogging
The Series 200/300/500 monitors come with a long-life Lithium battery. When using the PM sensor head the battery allows for 24 hours of remote operation between charges. Recharging takes just 3 hours. The monitor can be plugged into the mains and left to run indefinitely. Finally, in the Series 500 model, measurements can be stored on the device and downloaded later to a computer via the USB cable and bundled software.
What's included:
PM sensor head
Monitor base
LCD digital display
Lithium battery and charger
In-built datalogger
Monitor to USB cable
PC software
