Whole tree water relations research has just become easier and more accurate. The DBL60 Logging Band Dendrometer now incorporates its own self-contained datalogger. Using an internal lithium battery there is no need for external batteries or solar panels to power the logger, meaning it can be attached to a tree and set logging with no other accessories or requirements.
Such independence means multiple trees throughout an experimental site can be continuously logged over a much larger area than if they were required to be connected to a central logging system. Small trees, large trees, neighbouring trees or very distant trees can now easily be measured without physically limiting design constraints. The DBL60 is a very reliable and low cost method of accurately measuring and monitoring tree growth rates.
DBL60 Logging Band Dendrometer Features
Rotary position sensor
Step-less reading
No upper limit in stem diameter
Built-in datalogger
IR data access
Optional internal temperature logging
Non-invasive fixing
High resolution (1µm)
Operating Conditions
Minimum Stem Diameter 80 mm
Maximum Stem Diameter No limit
Increment Range 60 mm
Resolution 0.001 mm
Linearity 2% of full scale
Memory Capacity 50,000 readings or 4 years at hourly readings
Communications Infrared
Temperature
Measurement Accuracy ± 2°C
Power
Battery Capacity Approx 5 yrs at hourly intervals
Type Internal Lithium
Weight
Weight 450gm
Strength
Tightening Strength 15 to 20 N
Dimensions
Tape Spool Length 15 m
Tape Spool Width 12 mm
